This is an old revision of the document!


Release

2022-08-05

XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor.
For devices with the new SE processor, after upgrading the firmware to v1.1.4, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version.
Devices with existing SE processor can be downgraded to a lower version.
For more information, check the serial number of the device and contact the Suprema (supremainc.com).

New features and improvement

1. Improved the OSDP ID to also be deleted when a security tamper occurs on the X-Station 2 connected as a slave device.

2. Supports the dual SE processor.

Bug Fixes

1. When the LAN cable connected to the device is disconnected and reconnected, it takes a long time for IP to be assigned by DHCP (Affects version: v1.0.0).

2. Intermittent Mobile Card not authenticating (Affects version: v1.0.0).

  • Improved BLE Micom Firmware and BLE Recovery RFCore.

3. Master device reboots when you modify the number of Floor in a Zone > Scheduled Unlock (Affects version: v1.0.0).

4. The modification is not applied when setting the Intelligent Slave-related settings in the detailed information of registered devices in BioStar 2 (Affects version: v1.1.2).

  • Intelligent Slave: A function that enables 1:1 or 1:N matching directly from the Suprema device and transmits the authentication result as OSDP card data to the third-party controller.

5. Recently issued iClass Seos card from HID not recognized by device (Affects version: v1.0.0).

6. Device reboots when card is continuously authenticated (Affects version: v1.0.0).