Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | |||
en:anti-tailgating_at_doors_with_input_signals [2020/02/26 09:04] jhlee2 |
en:anti-tailgating_at_doors_with_input_signals [2021/12/17 10:53] (current) peterk |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== Anti-Tailgating At Doors With Input Signals ====== | ====== Anti-Tailgating At Doors With Input Signals ====== | ||
- | The anti-tailgating feature is supported from the BioStar 2.7.8 and the latest firmware of Suprema devices. To use this feature, you need to upgrade both BioStar 2 and device firmware over the below versions. | + | The anti-tailgating feature is supported from the BioStar 2.7.8 and the latest firmware of Suprema devices. To use this feature, you need to upgrade both BioStar 2 and device firmwares to the versions listed below or above. |
\\ | \\ | ||
Line 6: | Line 6: | ||
\\ | \\ | ||
- | When you matched both BioStar 2 server and device firmware version, you can configure anti-tailgating feature in 'Door' and 'Device'. | + | When you match both BioStar 2 server and device firmware version, you can configure anti-tailgating feature in 'Door' and 'Device'. |
\\ | \\ | ||
Line 12: | Line 12: | ||
\\ | \\ | ||
====== 1. Anti-tailgating at door ====== | ====== 1. Anti-tailgating at door ====== | ||
- | In the door configuration page, you can see the anti-tailgating feature as the below. | + | In the door configuration page, you can see the anti-tailgating feature as below. |
\\ | \\ | ||
- | You can configure the anti-tailgating as the exit button or the door sensor. | + | You can configure anti-tailgating as an exit button or a door sensor. |
\\ | \\ | ||
Line 35: | Line 35: | ||
* If you try to re-add the anti-tailgating feature configured device in the lower BioStar 2 version, you need to do factory reset the device. | * If you try to re-add the anti-tailgating feature configured device in the lower BioStar 2 version, you need to do factory reset the device. | ||
</callout> | </callout> | ||
+ |