Differences

This shows you the differences between two versions of the page.

--- en:apb_zone_based_on_the_door_status_door_sensor [2020/08/04 09:00]
yjjung created
+++ en:apb_zone_based_on_the_door_status_door_sensor [2021/12/20 10:35] (current)
peterk
@@ Line 8: / Line 8: @@
   * To use this feature, you need to match both BioStar 2 server version and device firmware version.
   * **BioStar 2 Version : V2.8.3 or later**
-  * Some firmware versions are not released yet. **Star mark versions(*)** will be released in 2020 3Q. (//July 29, 2020//)
+  * **Star-marked versions(*)** are released in 2020 3Q. (//July 29, 2020//)
 </callout>
 {{ :en:2.8.3_1_.png?nolink |}}
+<callout type="primary" icon="true">
+** New devices support this feature: **
+  * FaceStation F2 FW 1.0.0 or above with BioStar V2.8.6 or above
+  * X-Station 2 FW 1.0.0 or above with BioStar V2.8.11 or above
+</callout>
 \\
-==== How to enable the door status based APB? ====
+==== How to enable the door-status-based APB? ====
 **i) Door setting**
   * Door sensor is necessary
@@ Line 23: / Line 29: @@
 \\
 \\
-==== How differently does it work when the option is enabled or disabled? ====
+==== How differently does it work when the option is enabled & disabled? ====
 **Device 1 with 'Use Sensor when Entry Confirmed APB enabled' ON**
 The APB alert is not triggered even when you authenticate without the exit door authentication until the door opened/closed.