Differences

This shows you the differences between two versions of the page.

--- en:changing_the_device_text_message_english [2022/11/02 16:03]
sungjun [How to set up?]
+++ en:changing_the_device_text_message_english [2022/11/03 11:23] (current)
sungjun
@@ Line 2: / Line 2: @@
 ====== Changing the Device Text Message (English) ======
+<html>
+<center></html>
+**[Before updating the resource file / After updating the resource file]** \\
+<html>
+</center></html>
+{{ :en:changing_text_english_20.png?800 }} \\
 It is possible to customize languages, or to change the message displayed on the device by configuring the device’s resource file. Follow the steps below to change the texts displayed on the device (Facestation F2). \\
@@ Line 8: / Line 16: @@
 . Download the Resource file zip folder that matches the device at [[https://support.supremainc.com/en/support/solutions/articles/24000015061--biostar-2-changing-the-device-language-translation-|[BioStar 2] Changing the Device Language (Translation)]] and unzip the zip folder. \\
-{{ :en:changing_text_english_1.png?500 }}
+{{ :en:changing_text_english_1.png?500 }} \\
+{{ :en:changing_text_english_2.png?500 }}
 . Download the Resource Tool. It is located inside the latest resource file. \\
-{{ :en:changing_text_english_2.png?500 }}
 . Open ResourceTool_IncludeFSF2.exe and run as administrator. \\
@@ Line 21: / Line 28: @@
 {{ :en:changing_text_english_4.png?500 }} \\
-{ {:en:changing_text_english_5.png?500 }} \\
+{{ :en:changing_text_english_5.png?500 }}
 . Fill out the information at **TagWrite** (Firmware Version, Device Type, Card Type). Note that the **DeviceType** must match to read resources at BioStar 2. \\
@@ Line 32: / Line 39: @@
 . The edited information can be saved by pressing **Save**. Make sure to save the files in Resource file format (.rc). \\
+{{ :en:changing_text_english_8.png?500 }} \\
+{{ :en:changing_text_english_9.png?500 }}
 ===== Changing Language Display at English Setting =====
 While the device language is set at English, I will customize the “Access Granted” window to show “WELCOME” instead. Here is a demonstration of changing the resource to display a different value from the default. \\
 . Find the **English** section at the **Resource Table**. \\
+{{ :en:changing_text_english_10.png?500 }}
 . Find “Access Granted” and double click to edit. Change to “WELCOME.” \\
+{{ :en:changing_text_english_11.png?500 }} \\
+{{ :en:changing_text_english_12.png?500 }}
 . Press **Build**. A **.bin** file will be created at the location of the Resource Tool. I will rename the file to FSF2_RES_WELCOME. \\
+{{ :en:changing_text_english_13.png?500 }} \\
+{{ :en:changing_text_english_14.png?500 }}
 . Copy the **.bin** to <Program Files -> BioStar 2(x64) -> resource>. Continue with administrator permission. \\
+{{ :en:changing_text_english_15.png?500 }} \\
+{{ :en:changing_text_english_16.png?500 }}
 . Login to BioStar 2. \\
 . Go to Device and choose the device to customize. \\
+{{ :en:changing_text_english_17.png?700 }}
 . Go to **Advanced** -> **Display/Sound**. Press **Update Resources**. \\
+{{ :en:changing_text_english_18.png?700 }}
 If successful, this message will appear. \\
-. The device will reset after applying the resource file. Check to see if the customization is applied on the device through authentication. \\
+{{ :en:changing_text_english_19.png?250 }}
+. The device will reset after applying the resource file. Check to see if the customization is applied on the device through authentication. \\ \\
+{{ :en:changing_the_device_language_or_device_text_message_english_.mp4?900x506 |}} \\
+----