Differences
This shows you the differences between two versions of the page.
en:how_to_configure_wiegand_output [2016/07/08 13:26] 127.0.0.1 external edit |
en:how_to_configure_wiegand_output [2021/12/17 10:15] (current) peterk |
||
---|---|---|---|
Line 3: | Line 3: | ||
====== How to configure Wiegand Output ====== | ====== How to configure Wiegand Output ====== | ||
- | With BioStar 2, Wiegand formats can be predefined and assigned to each device for easy configuration. | + | With BioStar 2, Wiegand formats can be predefined and assigned to each device with simple configurations. |
- | Users can avoid cumbersome settings of applying the same format to multiple number of devices one by one. | + | Users can avoid repetitive applying of the same format to multiple devices one by one. |
1. Go to ‘Card Format’ in Setting of BioStar 2. | 1. Go to ‘Card Format’ in Setting of BioStar 2. | ||
Line 10: | Line 10: | ||
{{:en:w1.png?nolink&800|}} | {{:en:w1.png?nolink&800|}} | ||
\\ | \\ | ||
- | 2. Select one of the default Wiegand format options or add a new Wiegand format. | + | 2. Select one of the default Wiegand format options or add a new Wiegand format by clicking on the table rows. |
\\ | \\ | ||
+ | |||
{{:en:w2.png?nolink&800|}} | {{:en:w2.png?nolink&800|}} | ||
\\ | \\ | ||
Line 18: | Line 19: | ||
{{:en:w8.png?nolink&800|}} | {{:en:w8.png?nolink&800|}} | ||
\\ | \\ | ||
- | 4. Go to **Device** and expand ‘Advanced’ setting tap and scroll down, and set to use **Out** and choose one of predefined format. | + | 4. Go to **Device** and expand the ‘Advanced’ setting tap and scroll down and set to use **Out** and choose one of predefined format. |
\\ | \\ | ||
{{:en:w3.png?nolink&800|}} | {{:en:w3.png?nolink&800|}} | ||
Line 28: | Line 29: | ||
6. Set **Enable Fail Code** or **Bypass Mode** depending on the system usage. | 6. Set **Enable Fail Code** or **Bypass Mode** depending on the system usage. | ||
<callout type="tip" icon="true"> | <callout type="tip" icon="true"> | ||
- | Enable Fail Code : Set to send out a fail code at auth failure. It enables 3rd party system to be able to detect auth fail events by checking the designated fail code number. \\ | + | Enable Fail Code: Set to send out a fail code at auth failure. It enables 3rd party system to be able to detect auth fail events by checking the designated failure code number. \\ |
- | Bypass Mode: It makes the device send out Card Data to 3rd party device without making an authentication. With this mode, the device works as a dummy device, and card data only can be transmitted through Wiegand. | + | Bypass Mode: It makes the device send out Card Data to the 3rd party device without making an authentication. With this mode, the device works as a dummy device, and card data can only be transmitted through Wiegand. |
</callout> | </callout> | ||