Old revisions Add to book Export to PDF This is an old revision of the document! Unlimited Access Level and Access Group Supported From BioStar 2 v2.7.3, unlimited access level and access group are supported by BioStar 2 software. But in current Suprema device firmware is not supported for unlimited access level and access group. (May, 2019 According to the capacity difference of devices, 1st generation entry level devices has more strict limitation then 2nd generation devices. Please refer an article below and check the capacity differences. [BioStar 2] Notice for Usage of Combined Environment 1st Generation Entry Level Devices and 2nd Generation Devices If you generated more access levels and access groups than device capability, devices would lose sync with BioStar 2 server. If your device lost sync with Biostar 2 server, then the system would not operate properly. From BioStar 2 v2.7.3, Floor Level is supported without limitation. Referred article : [BioStar 2] BioStar 2.7.3 Unlimited Floor Level Supported