Differences

This shows you the differences between two versions of the page.

--- en:how_to_configure_wiegand_output [2016/07/08 13:26]
127.0.0.1 external edit
+++ en:how_to_configure_wiegand_output [2021/12/17 10:15] (current)
peterk
@@ Line 3: / Line 3: @@
 ====== How to configure Wiegand Output ======
-With BioStar 2, Wiegand formats can be predefined and assigned to each device for easy configuration.
+With BioStar 2, Wiegand formats can be predefined and assigned to each device with simple configurations.
-Users can avoid cumbersome settings of applying the same format to multiple number of devices one by one.
+Users can avoid repetitive applying of the same format to multiple devices one by one.
 . Go to ‘Card Format’ in Setting of BioStar 2.
@@ Line 10: / Line 10: @@
 {{:en:w1.png?nolink&800|}}
 \\
-. Select one of the default Wiegand format options or add a new Wiegand format.
+. Select one of the default Wiegand format options or add a new Wiegand format by clicking on the table rows.
 \\
 {{:en:w2.png?nolink&800|}}
 \\
@@ Line 18: / Line 19: @@
 {{:en:w8.png?nolink&800|}}
 \\
-. Go to **Device** and expand ‘Advanced’ setting tap and scroll down, and set to use **Out** and choose one of predefined format.
+. Go to **Device** and expand the ‘Advanced’ setting tap and scroll down and set to use **Out** and choose one of predefined format.
 \\
 {{:en:w3.png?nolink&800|}}
@@ Line 28: / Line 29: @@
 . Set **Enable Fail Code** or **Bypass Mode** depending on the system usage.
 <callout type="tip" icon="true">
-Enable Fail Code : Set to send out a fail code at auth failure. It enables 3rd party system to be able to detect auth fail events by checking the designated fail code number. \\
+Enable Fail Code: Set to send out a fail code at auth failure. It enables 3rd party system to be able to detect auth fail events by checking the designated failure code number. \\
-Bypass Mode: It makes the device send out Card Data to 3rd party device without making an authentication. With this mode, the device works as a dummy device, and card data only can be transmitted through Wiegand.
+Bypass Mode: It makes the device send out Card Data to the 3rd party device without making an authentication. With this mode, the device works as a dummy device, and card data can only be transmitted through Wiegand.
 </callout>