Old revisions Add to book Export to PDF Book Creator Add this page to your book Book Creator Remove this page from your book Manage book (0 page(s)) Help This is an old revision of the document! How to batch upgrade devices If not for a specific reason, it is essential to apply the latest firmware for the devices. There will be additional features added to the BioStar 2, and also for the devices. However, if the current site is operating hundreds of devices, it is not an easy job to upgrade each device's firmware one at a time. To avoid this inconvenience, the BioStar 2 supports a feature where you can upgrade the firmware for multiple devices. Same type of devices should be selected. The device model type and the supporting card type must be the same. Ex) BioStation A2-OMPW 1. Select the devices that will be upgraded from the device list. 2. Click the 'Firmware Upgrade' icon. 3. Select the firmware version to be applied to the devices. 4. Click 'Yes' to proceed on the firmware upgrade. 5. Once the firmware upgrade is done, you will get a message when it is done successfully.