Old revisions Add to book Export to PDF Book Creator Add this page to your book Book Creator Remove this page from your book Manage book (0 page(s)) Help This is an old revision of the document! How to use video Video integration of BioStar2 – It’s simple integration to see recorded video and picture from NVR for certain log events. For video/picture confirmation, Realtime monitoring is not supported by BioStar2. video_menu.mp4 Note: To use BioStar2 video feature, you should install BioStar2 v2.5 server on x64 machine and configure with Maria DB server. If BioStar2 server is installed with MS-SQL, Video feature of BioStar2 v2.5 is not supported. BioStar2 installation path stores a video file and an image file (C:\Program Files\BioStar 2(x64)\ve\records) System administrator should manage the storage of HDD These files will be kept for minimum 2 weeks as default parameter The period can be adjusted more than 2 weeks (Maximum 15 weeks) If the remaining storage of C drive is less than 10%, past recording files will be deleted in accordance with BioStar2 setting 1. Confirm if BioStar2 Server machine is installed on x64 machine. 2. Confirm if Video Server of BioStar Setting is running. 3. Confirm if a license of BioStar2 AC standard is activated. 4. Confirm if you add a device and configure a door. Video configuration will operate in accordance with a log event of a configured door of a device. 5. Click on [Video] menu. Supported NVR : ACTi, Dahua, Hikvision Please confirm the following information and check your NVR connection with BioStar2 2.5 before you proceed your project. 1. Hikvision NVR 1) SDK version: v5.2.771 2) Tested NVR list : DS-7608NI-E2, DS-7616NI-E2, iVMS4200 v2.4(PC-NVR) 2. Dahua NVR 1) SDK version: v2.14.50523 2) Tested NVR list : DH-NVR608-32-4K, DH-NVR4416, SmartPSS V1.13.1.R.20160504(PC-NVR) 3. Acti NVR 1) SDK version: v3.0.12.42 2) Tested NVR list : NVR3 V.3.0.13.27_20161128 Enterprise(PC-NVR) 6. Click [Add New NVR] > Enter information of NVR 7. To add a camera of NVR, click [Add New Camera] or right click on the NVR list. 8. Click one of the added camera and confirm the camera and configure certain log event to take a video or picture Log type: Choose one of log types. It supports Video type and Image type Door: Choose one of doors to take a video/image from NVR Event: Choose certain logs from all log list. Biostar2 will keep the recorded video/image for the certain logs 9. Make the certain log event to check the settings with NVR Biostar2 will indicate the video/image after 3 mins. 10. Go to Monitoring menu and click Event log 11. Confirm the log event and see [view] list. To confirm the recorded data from NVR, click [ ▷ ] or an image icon to the view list. 12. If you click on [Large screen] from the left side, you can confirm large size of video file/image file.