Release

2019-07-12

New Features and Improvements

1. OSDP Standardization

  • Improved to comply with OSDP V2.1.7 protocol when connecting with 3rd-party controllers.

2. Supports Anti-Tailgating.

3. Supports setting options for Wiegand authentication result output.

  • User ID and Card ID

4. Increase of the number of administrators that can be added.
5. Increase of the maximum number of floor levels.
6. Supports options for selection by card type.
7. Support to the Clear APB for each user.
8. Supports checking module firmware version.
9. Supports the latest version of I/O module Micom (V1.3.1).
10. Firmware upgrade status is added to LED status indicator.
11. Support for connecting new devices.

  • XPass 2(XP2-MDPB, XP2-GDPB, XP2-GKDPB)

Main Fixes

1. When a door configured in a Scheduled Unlock Zone is opened by a Scheduled Unlock, the door is not locked if the zone is deleted.
2. A code is added to prevent the authentication fails because the cache memory is broken.

Bug Fixes

1. The device recognizes the iCLASS Seos card as a CSN card.

2. It does not respond to inputs from the slave device when booting the master device.

3. Applies FA improvement algorithm.

4. Start time is not applied in UTC when importing filtered logs using SDK.

5. A user cannot access BioStar 1.93 when using the latest firmware.

6. The device cannot recognize iCLASS cards issued by the first generation device.
7. Supports unsupported devices (FaceStation 2, FaceLite).
8. HID Prox cards are continously recognized.
9. The title of the credential input screen is displayed differently on the master device and the slave device when using multiple authentication mode.

  • Existing: master device (user ID, user name), slave device (user ID)
  • Update: master device and slave device (user ID, user name)

10. Relay works after reconnecting for authentication that occurred when elevator connection is disconnected.