Door Control API

API that configures whether the device is set as entrance/exit of the door, how the device will control the door, and the APB settings.

BS2DoorRelay

typedef struct {
    uint32_t deviceID;
    uint8_t port;
    uint8_t reserved[3];
} BS2DoorRelay;

1. deviceID
Device ID.

2. port
Relay port number.

3. reserved
Reserved space.

BS2DoorSensor

typedef struct {
    uint32_t deviceID;
    uint8_t port;
    uint8_t switchType;
    uint8_t apbUseDoorSensor;uint8_t reserved[1];
} BS2DoorSensor ;

1. deviceID
Device ID.

2. port
Input port number.

3. switchType
Type of the switch.

Value Description
0 Normally open
1 Normally closed

4. ​apbUseDoorSensor
Decides whether to use a door sensor when using Global APB.
Should be used with useGlobalAPB in BS2AuthConfig

5. reserved
Reserved space.

BS2ExitButton

typedef struct {
    uint32_t deviceID;
    uint8_t port;
    uint8_t switchType;
    uint8_t reserved[2];
} BS2ExitButton ;

1. deviceID
Device ID.

2. port
Input port number.

3. switchType
Type of the switch.

Value Description
0 Normally open
1 Normally closed

4. reserved
Reserved space.

BS2DoorStatus

typedef struct {
    uint32_t id;
    uint8_t opened;
    uint8_t unlocked;
    uint8_t heldOpened;
    uint8_t unlockFlags;
    uint8_t lockFlags;
    uint8_t alarmFlags;
    uint8_t reserved[2];
    uint32_t lastOpenTime;
} BS2DoorStatus;

1. id
Door ID.

2. opened
Determines whether the door is opened.

3. unlocked
Determines whether the door is unlocked.

4. heldOpened
Determines whether the door's status is held open.

5. unlockFlags
The priority of when the door gets unlocked, which will not operate if the priority is lower than the lock's priority. For example, if the door is locked with the operator priority, all users entry will not be allowed. The unlockFlags and lockFlags cannot have the same priority besides the default priority NONE.

Value Description Priority
0 None Normal
1 Scheduled High
4 Operator Very high
2 Emergency Highest

6. lockFlags
The priority of when the door gets locked, which will not operate if the priority is lower than the unlock's priority.

Value Description Priority
0 None Normal
1 Scheduled High
4 Operator Very high
2 Emergency Highest

7. alarmFlags
Status of the door alarm.

Value Description
0 No alarm
1 Forced open
4 Held open
2 APB violation

8. reserved
Reserved space.

9. lastOpenTime
The last time of when the door was open.

BS2Door

typedef struct {
    uint32_t doorID;
    char name[BS2_MAX_DOOR_NAME_LEN];
    uint32_t entryDeviceID;
    uint32_t exitDeviceID;
    BS2DoorRelay relay;
    BS2DoorSensor sensor;
    BS2ExitButton button;
    uint32_t autoLockTimeout;
    uint32_t heldOpenTimeout;
    uint8_t instantLock;
    uint8_t unlockFlags;
    uint8_t lockFlags;
    uint8_t unconditionalLock;
    BS2Action forcedOpenAlarm[BS2_MAX_FORCED_OPEN_ALARM_ACTION];
    BS2Action heldOpenAlarm[BS2_MAX_HELD_OPEN_ALARM_ACTION];
    uint32_t dualAuthScheduleID;
    uint8_t dualAuthDevice;
    uint8_t dualAuthApprovalType;
    uint32_t dualAuthTimeout;
    uint8_t numDualAuthApprovalGroups;
    uint8_t reserved2[1];
    uint32_t dualAuthApprovalGroupID[BS2_MAX_DUAL_AUTH_APPROVAL_GROUP];
    BS2AntiPassbackZone apbZone;
} BS2Door;

1. doorID
Door ID. For V1 devices, ID should be defined less than 65535.

2. name
Name of the door that will be displayed on the BioStar application. For V1 devices, name can't be defined.

3. entryDeviceID
Entry device ID.

4. exitDeviceID
Exit device ID.

5. relay
Door relay.

6. sensor
Sensor that detects the open/closed status of the door.

7. button
Exit button.

8. autoLockTimeout
Time for the door to lock after it has been opened. The unit is seconds.

9. heldOpenTimeout
Time for the door to be determined as held open. The unit is seconds.

10. instantLock
Decides whether to immediately lock the door when the sensor detects the door as closed.

11. unlockFlags
The priority of when the door gets unlocked, which will not operate if the priority is lower than the lock's priority. For example, if the door is locked with the operator priority, all users entry will not be allowed. The unlockFlags and lockFlags cannot have the same priority besides the default priority NONE.

Value Description Priority
0 None Normal
1 Scheduled High
4 Operator Very high
2 Emergency Highest

12. lockFlags
The priority of when the door gets locked, which will not operate if the priority is lower than the unlock's priority.

Value Description Priority
0 None Normal
1 Scheduled High
4 Operator Very high
2 Emergency Highest

13. unconditionalLock
Flag that decides whether to lock the door after autoLock timeout.

Value Description
0 Locks the door only when the door is closed after the autoLockTimeout.
1 Locks the door regardless if the door is opened or closed.

14. forcedOpenAlarm
Alarm that gets triggered when the door is forced open, which can be configured up to 5 alarms.

15. heldOpenAlarm
Alarm that gets triggered when the door is held open, which can be configured up to 5 alarms.

16. dualAuthScheduleID
Schedule for the dual authentication. Set the value as 0 for disable, 1 for enable, or set a schedule ID.

17. dualAuthDevice
Decides which device should perform a dual authentication.

Value Description
0 None
1 Only on entry device
2 Only on exit device
3 Both

18. dualAuthApprovalType
Decides whether to distinguish if the user belongs to an access group having authority when accessing the door .

Value Description
0 None
1 Check the last user's authority

19. dualAuthTimeout
Interval between the first user's authentication and the second user's authentication. The unit is seconds.

20. numDualAuthApprovalGroups
Number of access groups having authority of dual authentication.

21. reserved2
Reserved space.

22. dualAuthApprovalGroupID
List of access groups having dual authentication authority, which can be configured up to 16 access groups.

23. apbZone
Configures Anti Passback on the door. The Anti Passback zone ID and door ID is equivalent. Refer Zone Control APIfor further information.